Menu Close

PRODUCTS - MILITARY

Ballistic equipment protection SET

The set of protective ballistic equipment (hereinafter KZBO) is intended for the protection of vital parts of the body (chest and abdomen) from the fragmentation of grenades and bombs and ordinary bullets fired from pistols (caliber up to 9mm), submachine guns and revolver for protection level, MIA, according to standard NIJ 0101.04. The protective plates protect against the action of the rifle bullet at protection level IV (NIJSTD 0101.04) independently without the protective sheath of the protective vest. Ballistic helmet protects against fragmentation of grenades and bombs for protection level "Special Type" - NIJSTD 0106.01. In combination with the protection plate of protection level IV in the places covered by these plates, KZBO T-19P protects.--from bullets fired from automatic rifles. KZBO provides optimal accommodation of parts of NGOs and combat resources of users.

General characteristics of the protective ballistic equipment set KZBO provides the user with unhindered and fast use of personal weapons, military equipment and associated combat resources. The corresponding combat resources of the soldiers are determined according to their specialties.
The level of protection of the ballistic vest, without protective ballistic plates is IIIA according to the standard NIJ STD 0101.04, and the level of protection against fragmental effect is V50 > 500 m / s, according to MIL 662 F, with a standard NATO simulator of fragmentation weighing 1.1 g.
COMBAT BALLISTIC VEST (PBB)

Purpose and general characteristics of a ballistic combat vest:
The ballistic combat vest (hereinafter PBB) is intended to protect vital parts of the body (chest, abdomen and groin, neck, shoulders and upper arms) from the fragmentation of grenades and bombs and ordinary bullets fired from pistols, submachine guns and revolvers. PBB with protective ballistic plates, in the places covered by these plates, protects from bullets fired from automatic rifles, carbines and sniper rifles, as well as from 5.56 mmSS 109 bullets with an impact speed of 944 m / s ± 9 m / s. PZB is intended for carrying and combat use of all parts of weapons, military equipment and protective resources and enables optimal distribution of soldiers' equipment on the upper part of the body.
The lower protection of the vest, without protective ballistic plates, is at least IIIA according to the NIJ STD 0101.04 standard, ie the vest protects from revolver ammunition and fragmentation of fragments is V50 > 500 m / s, according to MIL 662 F, with a standard NATO simulator of fragmentation of 1.1 g.

Set of protective ballistic equipment is intended to provide the prescribed ballistic protection of users during its use in special and related units, designed and manufactured to provide optimal accommodation of parts of NGOs and combat resources, but in accordance with the needs and available Opportunities can also be used by members of other units and institutions of the Serbian Army.

The purpose of KZBO T-18 is to protect vital parts of the body (chest, abdomen and head) from the fragmentation of grenades and bombs and ordinary bullets fired from pistols, submachine guns and revolvers, ie protection level IV (NIJ STD 0101.04).

For the helmet ("FAST HELMET") of members of special units, the level of protection against the fragmentation of grenades and bombs is IMA (NIJ STD 0101.04). In combination with the protection plate of protection level IV (NIJ STD 0101.04), in the places covered by these plates, KZBO protects from PA bullets fired from automatic rifles.

KZBO T-18 is also intended for carrying and combat use of the belonging parts of weapons, military equipment and combat resources, so that it enables the most optimal arrangement of soldiers' equipment in the upper part of the body. If a plate carrier (so-called "Plate carrier") was used instead of a combat ballistic vest, in that case the level of plate protection would be IV (NIJ STD 0101.04). The level of protection of the soft ballistics of the combat ballistic vest around the plates is IMA (NIJ STD 0101.04).

KZBO provides the user with unhindered and fast use of all parts of weapons, military equipment and associated combat resources. The associated combat resources of soldiers in special units are determined by his specialty.

Protective ballistic vest (hereinafter PZB) is intended to protect vital parts of the body (chest, abdomen and groin, neck, shoulders and upper arms) from the fragmentation of grenades and bombs and ordinary bullets fired from pistols, submachine guns and revolvers, for soldiers-chiefs of special units. PZB with protective ballistic plates, in the places covered by these plates, protects from bullets fired from automatic rifles, carbines and sniper rifles, as well as from bullets 5.56 mmSS 109 impact velocity 944 m / s ± 9 m / s. PZB is also intended for carrying and combat use of all parts of weapons, military equipment and protective resources and enables optimal arrangement of soldiers' equipment in the upper part of the body.

Protective flight uniform and equipment for pilots of the Republic of Serbia

The new model of protective and flying equipment for pilots is intended for the protection of life and health of users in the conditions of performing dedicated tasks and is characterized by multifunctionality of parts, the possibility of free and fast movements in accordance with the needs of pilots.

1. Pilot suit
Depending on the outside temperature, the coverall is worn with or without the coverall.
The overalls are made of non-combustible fabric (green) which has a surface mass of 165 g / m2 and which is made of aramid and antistatic fibers and auxiliary materials that are non-combustible (thread, zippers, velcro straps, rips tapes, elastic).

2. Knee pad-auxiliary
The upper plate-auxiliary is delivered together with the pilot's overalls.
The upper plate-auxiliary is made of non-combustible fabric) (green) which has a surface mass of 165 g / m2 and which is made of aramid and antistatic fibers and a suitable transparent foil resistant to wrapping and auxiliary materials that are non-combustible (thread, zipper), velcro strips).

3. Pilot jumpsuit
The jumpsuit is worn with the pilot's jumpsuit, depending on the outside temperature.
The jumpsuit is made of non-combustible knitwear (green) which has a surface mass of 200 g / m2 and which is made of aramid, Kevlar and antistatic fibers and auxiliary materials that are non-combustible (Thread, Zippers, Elastic).

4. Canvas pilot jacket
The jacket is made of non-combustible fabric (green) which has a surface mass of 210 g / m2 and which is made of aramid and antistatic fibers and non-combustible auxiliary materials. Synthetic fabric for quilted lining, felt (insulating material) for quilted lining , render (for cuffs and belt), Thread, Zippers, Velcro straps). The jacket has a quilted synthetic insert (with insulating material) for additional protection and comfort.

5. Flight equipment carrying bag (larger and smaller)
The bag for carrying flying equipment is made out of waterproof, wear-resistant and water-repellant fabric (green) "cordura" which has the surface mass of 300 g/m^2 and which is made out of a polyamide yarn (PA 6.6) and polyurethane which is applied to the back of the fabric.

Tactical uniform

The winter jacket is intended for protection from external meteorological conditions: cold, wind and rain. It is made of laminated fabric. In the manufacturing process, seams are "welded" on the inside, and a waterproof zipper is used on the outside. The lining of the hood is a net. The jacket can be used with or without a jacket.

  • Trilaminate
  • 100% Polyester
  • Steam-permeable
  • Waterproof
  • 100% Polyester

Jacket - a fleece insert, used as an integral part of a winter jacket at low temperatures. If necessary, the insole can be removed and used as a fleece jacket. In order to protect parts exposed to wear.
The pocket bags are made of mesh.
The cuffs are made of render knit, with an opening for the thumb.

  • Knit fabric "POLAR"
  • 100% Polyester
  • Gray-olive color (SMB)

Winter pants are intended for clothing, primarily in the winter, as the lower part of the uniform and as protection from meteorological conditions in the colder part of the year (autumn, winter). They have reinforcement from the basic fabric on the seat part and knees. They are made of the so-called winter ripstop fabrics. The pocket is made of basic fabric.

  • Ripstop fabric 2
  • 50% cotton, 50% polyester
  • ripstop
  • Gray-olive color (SMB)

Uniforms for the special units- COBRA

Set components:

Tactical trousers, in addition to the durability and elasticity of the materials used to make the item, give the user great flexibility and mobility when moving and taking different positions. The Rip-Stop material is designed for special clothing with long-lasting characteristics, and the ratio of cotton and synthetics in the ratio of 50% / 50% proved to be the most suitable and comfortable. This material is extremely durable, resistant to wear, does not wrinkle, dries quickly and looks very suitable, EN ISO 1833MULTIKAM MASKING DESIGN

The uniform model is specific for the new unique discreetly camouflaged gray-black color, which is adapted for both off-road use and for wearing in urban areas. This model of trousers has eight pockets that allow the storage of all the necessary little things that you carry with you.

Tactical trousers are made of Rip-Stop material with reinforcement on the knees and tops of the upper pockets ,a material that protects against wear and is also waterproof. Tighteners on the back of the trousers, which will enable the socks to be attached to the body as needed by the user.

Tactical blouse (durability and durability of the material is extremely comfortable and suitable for use when wearing equipment in field conditions), a model that has a flap on the back that serves for easier movement. The fold allows the blouse not to be tight and to be suitable for wearing when moving and gives the body breathability.

The blouse has a concealed zipper, and there is a velcro on the part that goes over the zipper. At chest height, on either side are two tactical hidden epics. In addition to them, this jacket has two more epics on the sleeves with a zipper. The sleeves are wide, and the ends are adjusted over the velcro strap.

Combat uniform for the army of the Republic of Northern Macedonia

Combat blouse:

The front part has a nozzle molding and is fastened with 5 buttons, of which 4 buttons are hidden in the molding and are not visible. On the left side of the upper part of the blouse, from the collar and from the edge, there is the first opening of the button. The buttons are sewn on the right side of the front. The distance of the buttons from the edge of the edge is 3.5 cm. In the middle of the front part, at the height of the upper edge of the patna, a seam tape is sewn on the pockets (intended for fastening the mark d. In the middle along the length, the velcro tape is sewn with one stitch. On the front there are two outer pockets on the chest with patna. Above the right pocket there is a velcro strap for attaching the last name. The sleeves are classic and made of two parts. The two pockets are sewn oblique pockets. The dimensions of the pockets are 16 cm high. The bottom side is sewn with velcro straps.

Combat pants:

The pants have a slit that fastens with 4 buttons. The buttons are sewn on the right side of the slot. The first upper button is visible, while the 3 buttons are hidden.

The seat of the trousers is reinforced with another layer of fabric, the belt is 4 cm wide. The outer part of the belt is not a separate part. The inside of the belt is made of a special piece cut from the face of the base fabric.

The pants on the upper part have two oblique inner pockets with a pocket bag made of basic material 30 cm deep.

There is one side pocket with a sweat on both legs at the height of the hips. The outer and inner part of the road are connected laterally and along the upper edge. The pockets have 3 folds, two folds in the middle of the pocket are 3 cm deep, and the final fold is 6 cm deep, which is free on the upper edge of the pocket. The folds are directed towards the back of the leg. They have two buttons on the top of the pocket.

The legs in the knee area are reinforced with another layer of fabric.

Camouflage uniform (blouse + Trousers) SOD-ltaly

Technical and technological possibilities and quality of YUMCO products enable various aspects of business cooperation and production, which resulted, among other things, in cooperation with the well-known brand SOD, for the production of fabric for camouflage uniform and its sewing with original auxiliary material (velcro straps, zippers, buttons in appropriate camouflage design, as well as original labels, ribbons, etc.). The sewing itself is according to the prescribed type of stitches and the defined positions of stitches and reinforcement with stitched rings.

The camouflage uniform is made of cotton-synthetic fabric in rip-stop weave, appropriate pattern with the so-called Teflon treatment, which provides water repellency and reduced soiling, camouflage, as well as durability when performing tasks in different conditions and on different types of terrain.

The blouse is slightly waisted, with a satin in the shoulder part of the front and back and a slightly rounded hem. It has a collar raised in the back, with an embroidered star symbol on the front extensions. The sleeves are angled, two-part. In the shoulder part, they have sewn-on pockets with zippers and sewn-on fibrous velcro. Reinforcement is sewn in the area of the elbow, and above the hem, a shaped and partially sewn strap with velcro strap is used to adjust the circumference of the sleeves. The fronts have sewn pentagonal chest pockets with a hidden zipper towards the middle and sewn-on fibrous velcro strips for identification in the upper part. Above the right pocket is sewn fibrous velcro tape for the rank mark. It is fastened with five buttons with a bar with strips of basic fabric, sewn on the fold of the right front. On the fold of the left front, the bottom is sewn on with a braided buttonhole, and in the middle, on the outside, there is a strap, which covers one outer hole.

The trousers have slightly tapered legs that form the outer part of the waist, reinforcement from the base fabric in the seat and knee area and an elastic braid with a stopper in the hem of the legs, strips of base fabric in the slit area. The base of the base fabric is sewn on the inside, and on the outside are 4. standard nuts, two at the front and back and 4. extended nuts with a small nut on the bottom, two at the ends of the side parts with an elastic band inside the belt, pockets from the waist to the side. At the back, above the reinforcement, there are two oblique pockets with strips that are fastened with velcro straps. Accordion pockets with three folds are sewn on the side, facing the side, with an elastic band in the back hem, over which a strip of buttons with a bar and a patna with a pad with a hole at the free end is sewn.