PRODUCTS - BALLISTICS
Protective ballistics plates (ZBP)
Protective ballistic plates with soft ballistic panel are intended for protection of the chest and back of the user from the action of at least one bullet 7.62 x 63 mm AP M2, NATO, grain weight 10.8g and impact velocity 878 ± 9 m / s, according to NIJ STD 0101.04. The protective ballistic plate is made of a combination of extruded high molecular density polyethylene and silicon oxide ceramics.
The front and rear plates are of identical shape, curved along the longitudinal axis, measuring 250 x 300 mm, slightly rounded at the lower edges and highly cut at the upper edges, which provides better mobility of the shooter when performing weapons operations during shooting. On the back of the plate (next to the body) there is a label with the following information: name, date of manufacture, serial number, protection class and name of the manufacturer. The plates are placed (retracted) in the appropriate pockets of the front and back of the combat ballistic vest.
ZBP, protection level III
Level of protection: NIJ 0101.04-III
Composition: 100% polyethylene
Size: M, L, XL
Mass: up to 1,3kg
Shape: Single Curve, Multi Curve
NIJ Certificate:
- NIJ 0101.04
- NIJ 0101.06
Ammunition:
- 7,62x51mm x 51 nato – 847 m/s
ZBP, protection level III+
Level of protection: NIJ 0101.04-III+
Composition: 100% polyethylene + ceramic
Size: M, L, XL
Mass: up to 1,7kg
Shape: Single Curve, Multi Curve (SA)
NIJ Certificate:
- NIJ 0101.04
- NIJ 0101.06
Ammunition:
- 7,62x51mm nato – 847m/s
- 7,62x45mm SS109 – 944m/s
ZBP, protection level III++
Level of protection: NIJ 0101.04-III++
Composition: 100% polyethylene + ceramic
Size: M, L, XL
Mass: up to 1,75kg
Shape: Single Curve, Multi Curve
NIJ Certificate:
- NIJ 0101.04
- NIJ 0101.06
Ammunition:
- 7,62x51mm FMJ – 830m/s
- 7,62x39mm MSC – 720m/s
- 7,62x45mm SS109 – 930m/s
ZBP, protection level IV
Level of protection: NIJ 0101.04-IV
Composition: polyethylene + ceramic
Size: M, L, XL
Mass: up to 2,4kg
Shape: Single Curve, Multi Curve
NIJ Certificate:
- NIJ 0101.04
- NIJ 0101.06
Ammunition:
- 7,62x54R – 860m/s
- 30-06m2 An – 878m/s
Upholstered 2 in 1 backpack for laptop and personal documentation
Upholstered 2-in-1 backpack for laptop and personal documentation, with shoulder straps, allows hands to be free when going to the field, with maximum computer protection.
The design of the backpack is in line with the specific needs to easily and quickly pack and transport the most necessary equipment, while being very clear and easily accessible for handling.
The spacious interior of the backpack has a laptop compartment specially lined for protection against impact, the bottom of the tower is resistant to water splashes.
The front can be opened and laid down for easy handling.
Tactical bagpack
The Tactical backpack is intended for a wide range of activities, such as a long stay in nature, and during the formation of internal partitions, the transfer of sensitive and expensive equipment.
The basic material of high-endurance cordura, capacity about 30L.
This backpack has a large number of adjustable compartments as needed by the user as well as a large number of pockets.
Ballistic safety helmet
The helmet militarily protects the soldier's head from cold weapons, fragments and bullets of high-explosive projectiles and bombs and the action of small arms and with mounts for mounting accessories (picatini rail and OES mount) allows the installation and use of various optoelectronic devices, Tk1 equipment or other resources for which is intended for use with a helmet.
Anti Riot shield for members of the police of the Republic of Serbia
The Anti Riot Shield is intended for special police forces and intervention units. The shields are usually long enough to cover the average person from the top of the head to the thighs. Anti Riot protectors provide protection to the user from clutter and from various blunt objects and projectiles.
Anti Riot shields have been shown to be an effective way to repel protesters and prevent them from breaking through police ranks. These shields are always used in conjunction
with other rebel protection equipment or protective equipment. Although tactics may vary, shields serve to block or repel dangerous objects and people. The shield is usually worn with one hand, leaving the other hand free.
Camouflage cloak (“Invisible warrior”) M-20
Camouflage cloak M-20 - “Invisible warrior” is intended to increase the camouflage protection of soldiers in conditions when there is no possibility of visual observation of the battlefield, but devices for surveillance and reconnaissance with devices for detecting the thermal reflection of the target are used.
The "invisible warrior" is made of specific materials that provide suppression of thermal reflection by the dispersion of heat emitted by the soldier's body, which reduces the detectability in the infrared part of the electromagnetic spectrum by surveillance and reconnaissance devices. In addition to reducing the thermal reflection, the M-20 camouflage cloak provides its camouflage pattern and an increase in camouflage protection in the visible part by breaking the body contour with the shape and camouflage characterizes of the material. The camouflage cloak M-20 provides the smooth implementation of the tasks of all bales in a temperature range of -30 to 50 °C and in day and night conditions.
Rain suit M-20
The M-20 rain suit is intended for reconnaissance, sabotage and parachute units of the Serbian Army. The M-20 rain suit is used as protection for soldiers in rainy conditions. All seams are welded on the back of the fabric with a suitable tape, thus preventing the penetration of water and wind inside the rain suit.
Rain suit M-20 consists of:
Rain protection blouses M-20 and M-20 rain protection pants.
The rain suit is made of polyamide fabric.
M-20 sniper suit - Ghillie suit
The M-20 sniper suit is intended to increase the camouflage protection of sniper soldiers in the visible part of the electromagnetic spectrum during the implementation of combat operations, so as to provide covert movement, difficult detection and taking a suitable firing position. The suit for the M-20 sniper is two-part and consists of a vest with a hood and trousers. The front of the suit is made of waterproof polyamide fabric that protects the soldier from the wet surface. At the back, there are sewn-on straps on which specially defined bundles of NOMEX® fiber yarn are placed so that the contours of the soldiers adapt to the vegetation of the ambience. The secondary purpose of sewn-on straps is to enable the use of natural vegetation for the purpose of masking. The hood on the vest is in line with the dimensions of the helmet.
The use of NOMEX® fiber yarn provides resistance to burning, which provides the possibility of overcoming minor fire obstacles.